View Full Version : Bullet lube Question
speakski
08-16-2010, 10:22 PM
I have some older bullets with one lube groove, but some of the bullets 25% to 50% of the lube has fallen out of the groove. If I load them very light will they still work? or should I roll them in some LEE LIQUID ALOX?
Thanks for any help
mooman76
08-16-2010, 10:34 PM
They may or may not. I would roll them in alox just to be sure.
They may work with alox regarding not leading, but they pose a good likelihood of not being very accurate.
speakski
08-16-2010, 10:47 PM
Thanks for the help I'll try with alox and not expect to much for the accuracy.
Fixxah
08-17-2010, 03:45 PM
Pan lube them and they will work just fine.
MtGun44
08-17-2010, 10:36 PM
Shoot them and see. I'll bet they will be OK all the way around.
Bill
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.