View Full Version : 32 S&W - 32S&W Long -crimp
xtrmn8tr
08-13-2010, 10:16 PM
does anyone crimp the 32 S&W ... or 32 S&W Long?
noylj
08-13-2010, 10:24 PM
For a revolver, you roll crimp.
Lead bullet should have crimp groove or you crimp into the top lube band.
thebigmac
08-13-2010, 10:27 PM
very, very light taper crimp....
Guesser
08-13-2010, 11:18 PM
Yes I do just for uniformity if nothing else.
Larry Gibson
08-14-2010, 01:27 PM
very, very light taper crimp....
+1. Even with the max .32S&W loads ina solid frame revolver there is going to be any bullet "jump" from recoil if the bullets are the right size. The light taper crimp eases cartridge insertion into the chamber and allows for a slight improvement in ignition umiformity. It should not be over done.
Larry Gibson
beagle
08-14-2010, 10:33 PM
Yep, I roll crimp on the .32 Long and .32 Mag for the Ruger./beagle
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.