dezynco86
08-10-2010, 11:11 AM
I am thinking about purchasing the Lyman 311299 bullet mold and was wondering if anyone out there has this mold. I need the length of the nose of the bullet.
I'm planning to use this bullet in my 300 Whisper AR-15 and need to know if the bullet will actually fit into the magazine. I'm currently running a RCBS30-180 that feeds and shoots well, but I have to seat so much of it into the case that it comes up a little short in the magazine. I can leave the bullet seated out a little ways exposing the grease grooves, but if I go out too far the nose of the bullet jambs into the chamber throat.
If anyone has the Lyman 311299 bullet mold, I would really appreciate the measurements of the bullet.
Thanks!
I'm planning to use this bullet in my 300 Whisper AR-15 and need to know if the bullet will actually fit into the magazine. I'm currently running a RCBS30-180 that feeds and shoots well, but I have to seat so much of it into the case that it comes up a little short in the magazine. I can leave the bullet seated out a little ways exposing the grease grooves, but if I go out too far the nose of the bullet jambs into the chamber throat.
If anyone has the Lyman 311299 bullet mold, I would really appreciate the measurements of the bullet.
Thanks!