0.390" Groove Barrel

[Good Cheer]

Any suggestions on who could be relied upon to make a rifle barrel with 0.390" groove diameter?
Please send a message if you know someone.

[felix]

http://www.bartleinbarrels.com ...... felix

[John Taylor]

That would be an odd size. there will be none of the button rifle barrels in that size. To do a cut rifle barrel in that size would require a cutter box to be made for that size bore, approximately .010" smaller than the groove diameter. This could be very expensive for a one off barrel. There are several shops that do custom barrels but they all use standard bore sizes, including me.

[theperfessor]

Just curious, what cartridge would this barrel be used for?

[Good Cheer]

It's a 9.5 x 52 case made from a Mauser A base brass.

[seppos]

I think that you could use .375 barrel.. In millimeters the .375 bullet is 9.525..

S