kbstenberg
07-25-2010, 09:02 AM
Yesterday i messed up. I am testing for expansion, an am trying several different Alloys with 4 different bullet styles. I pan lube my bullets. An had luber 2 of the 3 alloys
I naturally kept alloy A,B,C separate. But i through all 4 bullet styles of each alloy together, thinking i could separate into there separate groups. WRONG. Little did i know that 2 of the bullets were basically the same except for the height of the top band.
I now have to line up 300 bullets an physically com pair the height of there rings. What a PIA. Especially when there is less than a 1/32 difference.
Oh well live an learn. Just gives me more time to putter with my favorite new Hobie. LOL
Kevin
I naturally kept alloy A,B,C separate. But i through all 4 bullet styles of each alloy together, thinking i could separate into there separate groups. WRONG. Little did i know that 2 of the bullets were basically the same except for the height of the top band.
I now have to line up 300 bullets an physically com pair the height of there rings. What a PIA. Especially when there is less than a 1/32 difference.
Oh well live an learn. Just gives me more time to putter with my favorite new Hobie. LOL
Kevin