Charlie Two Tracks
07-21-2010, 08:05 PM
HOUSTON! We have ignition!
I searched about beagling and found an article that talked about beagling. I put the strips in my Lee mould like he said and it WORKED! The boolits came out with a head diameter or .361 and a body diameter of .359. So, I have a Lee sizing die (.358) and wanted it a little bigger. I thought for awhile and decided that I could put sandpaper around a pencil and get the diameter sanded a little larger. It took quite awhile but it actually worked. The boolits are .3585 right now and I can live with that or make them a little bigger. My revolvers cylinder is at .358. Anyway, it is much better than what I had before.[smilie=w:
I searched about beagling and found an article that talked about beagling. I put the strips in my Lee mould like he said and it WORKED! The boolits came out with a head diameter or .361 and a body diameter of .359. So, I have a Lee sizing die (.358) and wanted it a little bigger. I thought for awhile and decided that I could put sandpaper around a pencil and get the diameter sanded a little larger. It took quite awhile but it actually worked. The boolits are .3585 right now and I can live with that or make them a little bigger. My revolvers cylinder is at .358. Anyway, it is much better than what I had before.[smilie=w: