RCBS Mold Handles Question

[Fugowii]

I went to try out my new RCBS 32-170-FN mold and none of my handles fit this
mold. Do RCBS molds only use RCBS handles?

[deltaenterprizes]

What handles do you have?

[Edubya]

When you say, "don't fit", in what way do they not fit? I've enlarged the mould mounting hole on a couple of my handles and they work perfectly. I've also shimmed with brass to make a couple fit the handles. If you're wanting to get the job done there are many ways to work with what you have.

EW

[462]

Lyman and Lee 6-cavity handles are too thick. However, the Lees can easily be filed or ground to fit. Also, the Lees can be filed and ground to fit Lyman 4-cavity moulds.

[Fugowii]

What handles do you have?

Lee, Lyman, KAL. Hmmm, I only tried the Lee and Lyman. Maybe the KAL
will fit.

[RobS]

The Lyman 4 cavity handles would work for the RCBS molds if memory is right. Otherwise you'll have to either "modifiy" or buy some RCBS handles.

[deltaenterprizes]

I modified LEE handles to fit RCBS blocks.

[Fugowii]

The four cavity Lyman handles did the job. The four cavity H&G handles would work also.
Thanks to all for the tips.

[reloader28]

My Lyman handles fit Lyman, RCBS and Seaco molds, but I had to modify the handles.