6-Cavity .316" body & .306" nose

[NuJudge]

I had a run of molds made according to this drawing:

http://castboolits.gunloads.com/showthread.php?t=6064&highlight=NuJudge

I was trying to get as close to a 314299 as I could get in the Lee 6-cavity mold blocks, and intending this for oversize .303 and 7.62x54 rifles (mine don't like flat tips on bullets). Early reports from people who'd expressed interest is that they are casting bullets in the .317" body & .306" nose, and weigh about 190 grains. Here is one report:

http://castboolits.gunloads.com/showthread.php?t=8472

I have about 15 that are not spoken for. $56 each. PM me for my address.

Christopher Dingell

[dragonrider]

PM sent.

[Hip's Ax]

Chris, I'd love to have one. PM inbound. :-D

[abunaitoo]

Please save one for me. PM sent.

[Buckshot]

.............Heh, heh! I already HAVE one, so neener, neener, neener :-)!

...............Buckshot

[abunaitoo]

Chris, Just mailed the check. Thanks

[Dutch4122]

Received mine today from the Big Brown Truck. Looks great. Thanks Judge!

[todd987]

PM headed your way.

[Hip's Ax]

Check away!

[todd987]

MO went out yeaterday.
What # lyman top punch would you suggest?

[NuJudge]

I'm not sure. I've been looking at my mold and wondering that. I still have not had a chance to cast any.

Maybe I'll have a chance Sunday afternoon.

CDD

[4060MAY]

If the nose is the same as 314299, then a #467 top punch is correct.
same a 311467.

[Buckshot]

...........Bump.

...........Buckshot

[Hip's Ax]

If the nose is the same as 314299, then a #467 top punch is correct.
same a 311467.

I hope so, I already have that one! :drinks:

[Urny]

You have another PM coming.

[Calamity Jake]

And another PM

[LIMPINGJ]

Went in the mail this weekend for 1 mold.
Thanks
Jim

[NuJudge]

I still have some.

CDD

[4060MAY]

Hope you got my check
went out Thursday

[NuJudge]

Tell me how it works.

CDD

[obssd1958]

Might as well try this out. I gotta have something to load in the Mosin and the Brit.!
PM sent your way Chris.

[C1PNR]

Package arrived safe and sound today (8/31). Thanks very much!!:)

[todd987]

Same here - mold arrived yesterday and looks great.
Thanks for putting this buy together.

[4060MAY]

package arrived 8/31
cast 10# of bullets, range report next week
Thanks

[Dutch4122]

I cast up a small pile of these out of wheelweight + 1/2% tin on Tuesday, the 29th. Had to let things settle for a few days as sometimes my wheelweight alloy will have a tendency to "grow" overnight and the few days after a casting session. Results are:

.318" to .319" bands

.306" to .307" noses

**some slight out of roundness produced from a couple of the cavities, but nothing that the sizer die won't clean right up.

Weight is running 195 to 197 grains before lube and gas check.

To say I'm very happy with this mold would be an understatement. As far as I'm concerned this group buy went off very well. Thanks Judge!

[dragonrider]

Got mine in the mail this morning and it looks very good, not much for burrs took only a few minuits to clean them off. Hope to cast some this afternoon. Thanks a lot.

[castalott]

Bob brought his mold over tonight and well.....I'm impressed! I would like one of your molds also! I'll send a postal money order tuesday.

Thanks, Dale

[abunaitoo]

Mould came today. Thank you

[9.3X62AL]

Mine arrived in good order yesterday. THANK YOU!

[NuJudge]

I'm out of these molds, or really close to it. I need to stop taking orders for a couple of days to make sure I don't run short, or end up without one for myself!

CDD

[Nrut]

I'm out of these molds, or really close to it. I need to stop taking orders for a couple of days to make sure I don't run short, or end up without one for myself!

CDD
I hope I'm on your list as I sent you a MOD last Friday....[smilie=1:

[NuJudge]

Barring border disruptions, I'll get them mailed to Nrut, Kodiak1 and Slug.

CDD

[NuJudge]

Zips:

83709 (OBSSD1958?)
73159 Calamity Jake
75440
42701 Kycaster

There's a problem with the check from zip 98409. Please PM me.

CDD

[Nrut]

Barring border disruptions, I'll get them mailed to Nrut, Kodiak1 and Slug.

CDD

Thanks NuJudge....There are no restrictions on molds being shipped from the U.S. to Canada.....As far as customs goes sometimes they charge taxes and sometimes they don't.....Got to thinking it may not be a good idea to drive across the border and mail them as customs may charge you GST & PST.....

[NuJudge]

Things kept screwing up my ability to go across to Canada and mail them there, so I mailed them in the US. My first attempt in the US, they didn't like the Lee boxes, and gave me ordinary Priority Mail boxes. I reboxed and me second attempt they didn't like the ordinary Priority Mail boxes, and gave me INTERNATIONAL Priority Mail boxes. I re boxed again, and they couldn't get the meter to spit out the right value. After 45 minutes they finally put ordinary stamps on them.

[Calamity Jake]

NuJuge, got my mold today 9/9.

Thanks

[KYCaster]

Mine arrived today at 42701. Thanks Chris.

Jerry

[LIMPINGJ]

75440 arrived safe and sound. I hope to try it out tomorrow.
Jim

[Urny]

BBT arrived at 89815 Friday. Thank you kindly.