MOUNTAIN MIKE
07-05-2010, 12:49 PM
Hello;Just started using a Lee mold for the 50 cal. r.e.a.l. bullet. This is the first time I am using pure lead and I am having the problem of a line showing where the 2 halves meet. The line is only on the surface and does not extend through the bullet.
I keep a firm grip on the mold and don"t know why this is so noticable.When I use wheel weights for my 45 long colt there is barely a line on the bullets-many show no line what so ever.
I always run my mold very hot and it seems to work well otherwise as all is filled out very well/ am I asking too much of this mold?
Thanks in advance,Mountain Mike
I keep a firm grip on the mold and don"t know why this is so noticable.When I use wheel weights for my 45 long colt there is barely a line on the bullets-many show no line what so ever.
I always run my mold very hot and it seems to work well otherwise as all is filled out very well/ am I asking too much of this mold?
Thanks in advance,Mountain Mike