Offset hammer spur removal?

[2ndAmendmentNut]

I should be smart enough to figure this one out, but how do you remove an offset hammer spur from the hammer on a Marlin? BTW this one came on the rifle from the factory.

Thanks.

[HeavyMetal]

Should be held on with a set screw using a very small allen wrench.

At least that's how all mine have been installed.

I kinda like that little dingus especially since I was able to put in on left handed.

[woody1]

I should be smart enough to figure this one out, but how do you remove an offset hammer spur from the hammer on a Marlin? BTW this one came on the rifle from the factory.

Thanks.

See page 1 of the instruction manual and the exploded diagram toward the end. If you don't have one it's available here -------------------->
www.marlinfirearms.com/pdfs/manuals/mfc_centerfire_1894.pdf

Regards, Woody

[2ndAmendmentNut]

Thanks guys!