View Full Version : Handlles interchangablity
melloairman
06-26-2010, 07:43 PM
I have RCBS and Lachmiller molds with handles on them . Will either of them fit a Lyman mold ? Marvin
The handle slots in Lyman moulds are taller than those on RCBS moulds. The RCBS handles will work, but will require a shim to get a proper fit. Lee 6-cavity handles fit Lyman moulds perfectly.
Edit: The above relates to 2-cavity moulds.
dragonrider
06-26-2010, 08:35 PM
I don't know about Latchmiller, but RCBS handles will fit Lyman single and two cavity molds. The slots in Lyman 4 cavity molds is smaller, made for the large and cubersome handles that Lyman make for them.When I get a 4 cavity lyman mold now I recut the slots to fit RCBS or Lee handles, they are both the same size.
melloairman
06-27-2010, 12:33 AM
Thank you
Artful
06-28-2010, 10:22 AM
I don't know about Latchmiller, but RCBS handles will fit Lyman single and two cavity molds. The slots in Lyman 4 cavity molds is smaller, made for the large and cubersome handles that Lyman make for them.When I get a 4 cavity lyman mold now I recut the slots to fit RCBS or Lee handles, they are both the same size.
So what exactly do you have to do to have Lyman 4 Cavity recut to work with Lee handles?
dragonrider
06-28-2010, 11:47 AM
4 cavity lyman handle slots are 1/4" wide, I recut them to 5/16" .
montana_charlie
06-28-2010, 12:14 PM
4 cavity lyman handle slots are 1/4" wide, I recut them to 5/16" .
And...how thick are the jaws on RCBS handles?
JMtoolman
06-28-2010, 12:54 PM
I recut Lyman 4 cavities with a 9/16 slitting saw in a milling machine. Then all of the makes of the handles fit. Done this for years. The toolman
dragonrider
06-28-2010, 03:40 PM
RCBS handles measure approx, .300". Lee handles approx. .308".
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.