kbstenberg
06-21-2010, 08:10 PM
Some days ago i had posted about problems i had found with Mihec's 432423 concerning the bolt that holds the cam lever to the sprue plate. Sorry about my delay but here are the pictures of my fix
There is a picture of the shape that i filed the washer to.
Then i showed what the washer looks like when is sitting on the cam lever
I took a picture of the space between the cam lever an the sprue plate with the nut tightened on the bolt.
Next i showed what it looks like with the washer between the sprue plate an cam lever
I showed another shot like the one above, at a a different angle.
23066
23067
23068
23069
23070
There is a picture of the shape that i filed the washer to.
Then i showed what the washer looks like when is sitting on the cam lever
I took a picture of the space between the cam lever an the sprue plate with the nut tightened on the bolt.
Next i showed what it looks like with the washer between the sprue plate an cam lever
I showed another shot like the one above, at a a different angle.
23066
23067
23068
23069
23070