BT Sniper
06-21-2010, 01:35 AM
Got a chance to catch up a bit on some customer orders this weekend. Really came together well. Thought I would sare a few ideas and pics with you all. THese are all customer projects. I may get a chance to catch up on a few of my own again someday.
Got a auto bullet ejector put together for use with the standard CH dies and the large CH swaging press. Notice the cup to catch the ejection rod. Also has option to conect the rod to the ejector with a threaded coupler.
http://i636.photobucket.com/albums/uu87/BTSniper/P1030555.jpg
Machined a stronger swaging ram adapter for the Lee Classic Cast Press. Turned it down just enough to fit my ejector to it as well. Really made for a great set up. here it is with threaded base punch next to the stock Lee ram top with shell holder base punch.
http://i636.photobucket.com/albums/uu87/BTSniper/P1030553.jpg
Here it is attached to ejector.
http://i636.photobucket.com/albums/uu87/BTSniper/P1030552-1.jpg
Also put together a threaded adapter to use in the big Corbin rams to allow for a threaded base punch and use of my improved CH dies. I could have just machined the threaded base punch to fit the 5/8- 24 tpi ram and still probably will with next project. Finding a nut this thread size to lock it in place was a bit more dificult then the 1/2 fine thread I used in stead. Pic is with a 40 cal for size.
http://i636.photobucket.com/albums/uu87/BTSniper/P1030557.jpg
Finished 2 more sets of one step dies and it feels pretty good to get some what caught up again. Recieved 2 addition orders and will have those together shortly. Still have Jon's special order with the XTP punch to complete. This one has taken me a bit of time but it will be perfect when finished.
Hope everyone is getting a bit of shooting in.
Swage On!
BT
Got a auto bullet ejector put together for use with the standard CH dies and the large CH swaging press. Notice the cup to catch the ejection rod. Also has option to conect the rod to the ejector with a threaded coupler.
http://i636.photobucket.com/albums/uu87/BTSniper/P1030555.jpg
Machined a stronger swaging ram adapter for the Lee Classic Cast Press. Turned it down just enough to fit my ejector to it as well. Really made for a great set up. here it is with threaded base punch next to the stock Lee ram top with shell holder base punch.
http://i636.photobucket.com/albums/uu87/BTSniper/P1030553.jpg
Here it is attached to ejector.
http://i636.photobucket.com/albums/uu87/BTSniper/P1030552-1.jpg
Also put together a threaded adapter to use in the big Corbin rams to allow for a threaded base punch and use of my improved CH dies. I could have just machined the threaded base punch to fit the 5/8- 24 tpi ram and still probably will with next project. Finding a nut this thread size to lock it in place was a bit more dificult then the 1/2 fine thread I used in stead. Pic is with a 40 cal for size.
http://i636.photobucket.com/albums/uu87/BTSniper/P1030557.jpg
Finished 2 more sets of one step dies and it feels pretty good to get some what caught up again. Recieved 2 addition orders and will have those together shortly. Still have Jon's special order with the XTP punch to complete. This one has taken me a bit of time but it will be perfect when finished.
Hope everyone is getting a bit of shooting in.
Swage On!
BT