DEVERS454
08-14-2006, 09:12 PM
Well, the mold I got from Do-It molds (http://www.do-itmolds.com/) work quite well for making 36cal (.372") balls on one side and 32cal on the other.
The larger mold makes 44cal (8 cavities) on one side and 50cal (7 cavities) on the other.
You might get an ugly sprue if your not careful, but, for large volume and at CAS distances, they are certainly cheaper than what Hornady or Speer balls will cost you.
The larger mold makes 44cal (8 cavities) on one side and 50cal (7 cavities) on the other.
You might get an ugly sprue if your not careful, but, for large volume and at CAS distances, they are certainly cheaper than what Hornady or Speer balls will cost you.