tackstrp
06-16-2010, 11:36 PM
3.5 grains seems to work just fine. Can tell little to no differenct from factory ammo
Copy of Email from True BLue.
Thank you for your interest in Western Powders, Inc. "Ramshot" line of smokeless powders. I apologize for the delay in this reply but I have been out of the office and am just getting caught up on my e-mails.
We have the following loads for the 380 Auto using a 100 grain lead bullet and Ramshot "True Blue" smokeless powder.
Start Load: 3.4 grains
Max. Load: 4.1 grains
C.O.A.L. .970"
If you reduce the Cartridge Over All Length you must reduce the powder charge accordingly.
I hope this answers your questions.
Best regards,
Keith Anderson
Western Powders Ballistic Lab
Copy of Email from True BLue.
Thank you for your interest in Western Powders, Inc. "Ramshot" line of smokeless powders. I apologize for the delay in this reply but I have been out of the office and am just getting caught up on my e-mails.
We have the following loads for the 380 Auto using a 100 grain lead bullet and Ramshot "True Blue" smokeless powder.
Start Load: 3.4 grains
Max. Load: 4.1 grains
C.O.A.L. .970"
If you reduce the Cartridge Over All Length you must reduce the powder charge accordingly.
I hope this answers your questions.
Best regards,
Keith Anderson
Western Powders Ballistic Lab