PDA

View Full Version : Star accessories



cheese1566
06-13-2010, 01:00 PM
Let's see your homebrew/homemade Star accessories! Mounts, heaters, feeders, handles...need some ideas.

My Star is on order and I plan making my own PID controlled heater base and eventually my own air feed.

I see some of you have made some really nice oak boxes with drawers to mount them on (Duke Nukem's).

chrisx1
06-14-2010, 09:48 PM
Here's a bracket and Akro bin to catch the boolits:

http://i264.photobucket.com/albums/ii174/chrisx1/Star%20Sizer/th_DSC03609.jpg (http://s264.photobucket.com/albums/ii174/chrisx1/Star%20Sizer/?action=view&current=DSC03609.jpg)

Here's a home made shovel handle:

http://i264.photobucket.com/albums/ii174/chrisx1/Star%20Sizer/th_DSC03646.jpg (http://s264.photobucket.com/albums/ii174/chrisx1/Star%20Sizer/?action=view&current=DSC03646.jpg)

I also have a spring set up to hold the handle in the upright position. I can get a pic if someone wants to see it - wasn't my idea, I think I copied it from someone here.

Chris

Bob J
06-16-2010, 07:11 AM
Hi Chris,
Really like the idea of the Acro bin and bracket..... Acro bin is no problem but where did you get the bracket?

Thanx!

Bob




Here's a bracket and Akro bin to catch the boolits:

http://i264.photobucket.com/albums/ii174/chrisx1/Star%20Sizer/th_DSC03609.jpg (http://s264.photobucket.com/albums/ii174/chrisx1/Star%20Sizer/?action=view&current=DSC03609.jpg)

Here's a home made shovel handle:

http://i264.photobucket.com/albums/ii174/chrisx1/Star%20Sizer/th_DSC03646.jpg (http://s264.photobucket.com/albums/ii174/chrisx1/Star%20Sizer/?action=view&current=DSC03646.jpg)

I also have a spring set up to hold the handle in the upright position. I can get a pic if someone wants to see it - wasn't my idea, I think I copied it from someone here.

Chris

kbstenberg
06-16-2010, 07:28 AM
What is the string for thats attached to the counter weight below the bench?
Kevin

chrisx1
06-17-2010, 09:37 PM
bracket is just a piece of 1/8" steel about 3/4" wide and as wide as the bin - spaced out from the bench with washers.

Yep, the string and counterweight were used to hold the handle in the upright position. I use a spring now.

Bob J
06-18-2010, 07:16 AM
Thanks! Will have to give this a try..... Right now I size into a bin setting on the top of a stool.... This would be a vast improvement....:D


bracket is just a piece of 1/8" steel about 3/4" wide and as wide as the bin - spaced out from the bench with washers.

Yep, the string and counterweight were used to hold the handle in the upright position. I use a spring now.