View Full Version : .40 S&W brass
pathfinder
06-07-2010, 10:28 AM
Is there anything that can be done with these cut off pieces of .40 S&W brass? I was thinking driving bands. What some of your thoughts?22749
22750
mpmarty
06-07-2010, 06:49 PM
What some of your thoughts?
I'm wondering why anyone would cut down an already too short case?
pathfinder
06-07-2010, 07:25 PM
I cut them and use the base of the case to swage and case my .312 cast ak47 boolits up to .451 for my 45 acp.
randyrat
06-07-2010, 10:44 PM
I seen a tutorial on that proccess, very interesting.
I sometimes look at waste and try to figure what to do with it also. Keep thinking and an idea may just come to you.
ANeat
06-07-2010, 10:58 PM
If you had enough to make it worth your while you could make a die that would roll the base over and you could make a decent half jacket out of them.
Personally I would try and figure out a way to swage them without the trimming
Shiloh
06-08-2010, 07:56 AM
What were they cut down for??
SHiloh
pathfinder
06-08-2010, 08:03 AM
I use them for swaging
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.