Dang it!!!!

[Longrange]

[smilie=b:

Got my new Rock Chucker today, mounted it on the bench next to the Dillion 550. Put the .223 dies in to do some primer popping and sizing, got the third case stuck. Switched to the new Hornady dies I purchased for the 30-06 and bent the rod on the sizer as well as the primer pin.

Dangit, so much for the weekends ammo.

:groner:

[462]

If it ain't one thing, it's another...

[garandsrus]

Longrange,

You can pull the brass out of the die. Do a search and you should find instructions. It's pretty easy.

John

[buck1]

That happens now in again to remind us to be happy when it goes smooth! I feel your pain!!!

[Mk42gunner]

It has been a while since I had to pull a stuck case, but IIRC it takes a #3 drill, a 1/4-28 tap, bolt, washer, and a 9/16" socket.

Now I will probably get a stuck case the naext time I resize anything....

Robert

[wallenba]

A good excuse to buy the Lee universal decapping die. I removed the decapping pins from my sizing dies. I like it better that way.