.445 loads

[blaser.306]

Anybody have a pet load (s) for .445 supermag they would be willing to share ? Heavy boolit loads are best . Can be cast or the other kind ! any info would be apreciated . Blaser. :swagemine:

[onceabull]

28 gr 296, Ihmsa cases, 300 gr XTP or Saeco 433..in the 8" DW, 26 gr IMR 4227, same case & bullet /boolit ,for the 4" DW... NOT max in mine... may eventually go to AA 1680 for the longer one.. Onceabull

[Moonie]

I can't remember specifics on the loads I used, its been 15+ years since I owned my 7445 8" but I do remember I used only 1680 in it, after the 680 dried up anyway. 296 and 4227 were a tad too fast for good velocities especially with the heavies. Had a 320gr mold that dropped the boolits very heavy, right around 350gr. That was a handfull.

[leadman]

Can't remember what my load is for my 445, but I load 24grs. of WC680 with the Lee 310gr.RFN in the 44mag.
You might call Accurate Arms and ask if they have a load with 680 in the 445. They don't list any 445 loads on their website.