View Full Version : need top punch help
4719dave
06-03-2010, 08:24 PM
I have a lyman 4 banger number 356637C v was told its a 147gr 9mm r n haveing trouble finding what top punch :veryconfu any direction would be great
John J
06-03-2010, 08:36 PM
I went to castpics and found this for you
top punch#637
356637 .356" 147grs FNBB
hopes it helps
John J
beagle
06-03-2010, 09:07 PM
Actually, a flat TP will work for that. Take a 1/4" bolt with a shank and turn the head down and make it smooth and then cut the shank to length. Should work fine for any FN bullet design.
Electric drill and aflat file are all the tools needed./beagle
4719dave
06-04-2010, 07:29 PM
thanks guys
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.