CENTEX BILL
06-03-2010, 02:42 PM
I am working a deal for a PPC sixe bolt for a Remington shortaction. I have a spare Remington 722 that I would like to barrel to 7.62x39. I have a new take off SS 300 Short Remington Ultra Mag that I could chop the chamber end and rethread and rechamber. That will give it a .308 bore barrel instead of .311.
I shoot mainly cast boolits so sized them down would not be a problem.
I remember discustion about ruger mini 30's have chamber with a tappered thoat so one coud use either .311 or 308 size bullets. Is this internet legend or is it such a thing???
Who would have a reamer for purchase or rent to cut such a chamber? Would accuracy be greeatly affected??
Thanks in advance,
Centex Bill
I shoot mainly cast boolits so sized them down would not be a problem.
I remember discustion about ruger mini 30's have chamber with a tappered thoat so one coud use either .311 or 308 size bullets. Is this internet legend or is it such a thing???
Who would have a reamer for purchase or rent to cut such a chamber? Would accuracy be greeatly affected??
Thanks in advance,
Centex Bill