View Full Version : Article on Beagling a mold in latest FS
Maven
05-25-2010, 07:17 PM
I just got the current issue of "The Fouling Shot" this afternoon (haven't read it yet) and saw an article on Beagling a mold, which mentions our own John Goins (Beagle here), the inventor of the process. Thought you'd like to know.
beagle
05-25-2010, 09:01 PM
Saw that. I'm going to have to look into that adhesive he's using. He might be on to something it if removes fairly easy./beagle
alamogunr
05-26-2010, 08:43 AM
Please report on the adhesive. The aluminum tape I am using leaves a bad residue that is almost impossible to remove. Of course the tape is over 30 years old so the adhesive may have degraded.
John
W.TN
I knew that John would hit the " Big TImes " eventually.............
Many thanks to John for that great idea !
Ben
beagle
05-26-2010, 09:28 PM
The only thing big about me is my belly.../beagle
I knew that John would hit the " Big TImes " eventually.............
Many thanks to John for that great idea !
Ben
beagle
05-26-2010, 09:29 PM
PM me with your snail mail addy and I'll send you a business envelope of the original stuff I used./beagle
Please report on the adhesive. The aluminum tape I am using leaves a bad residue that is almost impossible to remove. Of course the tape is over 30 years old so the adhesive may have degraded.
John
W.TN
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.