M1 carbine WC820 Lee 130 gr

[sixpointfive]

Hello, looking for load data for my M1 carbine using WC820 and a Lyman 311410 cast 130 gr.

Thanks[smilie=s:

[WILCO]

with this boolit, but I did find a thread here in the forums where that particular boolit doesn't perform well in the carbine. If you're just starting out with this boolit, you might want to take a look:

http://castboolits.gunloads.com/showthread.php?t=26586

Powders that are listed in my load data book are Unique, Blue Dot, 2400, SR-4756,
H110 and AL-8 using #311410 130gr. (#2 Alloy) 1.680 OAL.

That's all the "help" I can give on this one. :coffee:

[beagle]

Start off using about 10.5 grains of WC820 with that bullet. I normally use 11.0 grains with a 311465 Lyman which weighs 129 grains and it functions fine in my carbine.

Start there and you may need to go up .5 grain but that funtions in my carbine./beagle