Freechex ?

[crowkiller2]

What is the length of the die? I have a 1/2 ton arbor press. Not sure I have enough clearance for the die. Thanks.

[edsmith]

my freechex ll with the plastic top part needs 3 in. with the forming rod.

[crowkiller2]

Thanks Ed
I have the small 1/2 ton press from harbor freight. It is 20 dollars less than the 1 ton press that alot of guys here use.
My 1/2 ton will work it has max
4 1/4" clearance.

[edsmith]

4 1/4" is plenty.