Heaviest cast load success in a 762x25 tokarev

[sheepdog]

Whats the heaviest anyone here has tried? I'd like to try the RCBS .312 120g with gas check. Anyone tried it or anything heavier?

[autofix4u]

If its 30 cal I have launched it out of a x25 case. From 60 grn XTPs to 240 grn rn cast.........
BUT I have 2 rifles in 7.62x25. I assume you are useing a TT33 or clone or a CZ52. I havent used the boolit you mention but use an older unknown maker 125grn rn often. The x25 really shines with a 115-125grn boolit and Wc820-H110.
I have/do use AA5744 with the 125 grn with good results but some unburned powder.
I also tried the Lee soup can the other day and was inpressed.
By the way SR primers only in my x25s, Destroyer carbines have crappy gas venting

[jbremount]

If its 30 cal I have launched it out of a x25 case. From 60 grn XTPs to 240 grn rn cast.........
BUT I have 2 rifles in 7.62x25. I assume you are useing a TT33 or clone or a CZ52. I havent used the boolit you mention but use an older unknown maker 125grn rn often. The x25 really shines with a 115-125grn boolit and Wc820-H110.
I have/do use AA5744 with the 125 grn with good results but some unburned powder.
I also tried the Lee soup can the other day and was inpressed.
By the way SR primers only in my x25s, Destroyer carbines have crappy gas venting

Hello, I also have a mold for the Lee soup can and plan to use it for my TT33/Yugo M57 gun. What velocities are you pushing? What type of brass are you using? Are you using Starline brass?

[leftiye]

I load a Lyman 311576 120 grain RNGC in my CZ52 with AA#7 (not telling how much). Not sure if it's a success or not - sure as he!! can't find the brass though. Throws it about 30 -40 feet.

[pakmc]

I found some 90 gr. .308 bullets and loaded them with 11gr.s of AA#9. BIG FLASHINGDEBANGING!!! The guy next to me at the range with the 10mm couldn't take the noise or concussion and left. I use a CZ52
Pat