wistlepig1
04-11-2010, 10:11 AM
I was able to find some H4198 the other day (1 month of looking).
I was going to start to see if a change in powder will change my luck for loading Casts in my Hornet. I have a Lyman 438 mold, bullits are sized .2255, bore is .224, will be using CCI SP prim, and will issue a small prayer when I start:bigsmyl2:
I have load data for J-words bullets of 11.5-12.5 grs. From those that have use 4198 in a Hornet.
Where would be a good starting point, I was thinking starting at 10 grs and working up at .5 grs to see if any would show promise. SUGGESTIONS!
I was going to start to see if a change in powder will change my luck for loading Casts in my Hornet. I have a Lyman 438 mold, bullits are sized .2255, bore is .224, will be using CCI SP prim, and will issue a small prayer when I start:bigsmyl2:
I have load data for J-words bullets of 11.5-12.5 grs. From those that have use 4198 in a Hornet.
Where would be a good starting point, I was thinking starting at 10 grs and working up at .5 grs to see if any would show promise. SUGGESTIONS!