Please recommend top punch

[Kermit2]

Hello. Could anyone please recommend which RCBS or Lyman top punch I need to use with bullets that are cast using a Lee 358-125-RF mold? This mold casts a 125 grain .358 flat nose bullet. I'm not sure which top punch to use, and am not where to find a reference chart. I'd prefer a RCBS or Lyman top punch. Here is a link showing the mold and bullet if needed. All help will be appreciated. Thanks.


http://www.midwayusa.com/viewProduct/?productNumber=145006

[OBXPilgrim]

Do you have to have an RCBS or Lyman for it?

I've got the 158gr RF .358 and the top punch I use is a counter-sunk bolt with the hex head filled in with hot glue & sanded down. The big meplat FN bullets don't really need much more & some top punches will be worse due to leaving a ring around the nose due to not fitting perfectly.

[462]

Kermit,
Yep, you'll have to fashion your own. I filled an extra one with epoxy, now it's a multi-boolit top punch.