96 grain mold

[hahaase]

Who makes a bullet mold in a 38/357 96 grain rnfp. I've looked at a few sites but can't find one. Thanks for the help

[Casting Timmy]

You might have to go custom.

Or a cheap alternative would be buying a Lee mold for a small 9mm bullet and see about using bullets and an abrasive to make the cavities bigger. You could also get a Lee double cavity for a 38 and take the sprue plate off and mill the top of the mold to decrease the weight of the bullet. Then put the sprue plate back on and test it out.