Bullplate isn't Bull

[wistlepig1]

I used Bullpate for the first time and wised that I had found out about it 30 years ago or the Lead Gods were smiling on me today. I had an old Lee 158 swc mold I got in the 70's and it was about used up, I took it apart ran the mill over the top to take out the rub marks, then followe.d the direction with the Bullplate. This old mold work out better than it has ever done. Smooth cut spures, good Alimenment, every thing just was working----------- now we all know that wasn't all because of the Bullplate, it was some pixie dust too.:kidding:

Good stuff and good vendor!

[mastercast.com]

I ordered eight (8) bottles of BULLPLATE LUBE", it arrived today, and the vendor added TWO (2) more bottles for FREE....reason? "There was enough room in the "flat rate" package for them."

[wistlepig1]

Good people and fast service. I got some of his bullit lube "green" havn't shot it yet, new snow storm yesterday so it will be a week before the range road dries out. Will post after I shoot it.

[mastercast.com]

I think I now have enough BULLPLATE LUBE" to last me until I end up playing a harp or "totin" a pitchfork!

MANY THANKS BULLSHOP!

That is absolutely the best sprue plate lube I have EVER used, and I am fairly certain that I have used them all!

When properly used, BULLPLATE" goes a looooooooooooooooooooooooooooooooooooong way!

[Lee]

Well, I ain't played with it yet, tho I've a bottle. I also see threads stating that Crest super whitening, followed by Kroil will do the same miraculous thing.
Geez. Wouldya thunk it is basic mold preparation, and that there are many NOT MAGIC paths to prepare a mold to drop boolits w/o a sledge hammer??? Just maybe the mold makers don't test their own product? QC ain't what it used to be?
Then you got folks with access to a Bridgeport or surface grinder who can correct manufacturer defects, Lee-ment their molds with Bryl-Cream, and attribute the results to something. There's the scientific way! Some of this black magic stinks of the 400mph carburetor with the magnetic platinum catalyst screen that oxygenates and polarizes your gas molecules to the air molecules to improve mileage, combustion, and revert global warming.
Outta here. You do what you have to, what works for you. Let the rest go their own way.

[DLCTEX]

Lee, try paddling with the flow for once. Try the Bullplate, give it a good, fair trial, then report back. I have read hundreds of good reports and no negative ones. This reflects my own experience. Yes, it's MAGIC!

[mastercast.com]

Lee,

WOW!

Just a suggestion...why don't you try BULLPLATE LUBE" SINCE YOU HAVE A BOTTLE OF IT?

If you are not satisifed with it,(following the included instructions) like many of us are, then you can make a valid/considered post. Absent that, your last post has no merit at all!(As in totally worthless!!!!!!!!!!!!!!)

Your last post made little sense to me for what that is worth.

[mastercast.com]

Whiten your teeth with Crest followed by Kroil? Give that a try and get back to me.

(If you are able!)

You might want to lay off the recreational pharmaceuticals for a while.

[fatelk]

I ordered a bottle of bullplate last month. I wish I had found it years ago! Great folks, too.

[Springfield]

There is generally more than one way to do anything. I have found Bullplate to be the easiest way to make my moulds work better. So why waste my time looking for another way, I'd rather go shooting or cast some more bullets.

[edsmith]

I have a negative comment about bullplate,as a mouth wash, it sucks. :)

[Bill*]

I have a negative comment about bullplate,as a mouth wash, it sucks. :)

Did you dilute it with vodka per directions?

[geargnasher]

Did you dilute it with vodka per directions?

:p If you use it straight it'll keep stuff from sticking to your dentures!

Gear

[wistlepig1]

I found a new use for Bullplate today when I mixed up the BP with my Absorbine Jr and my feet stopped being itchy. BULL may have a new market!!!!!!!!!!price increase comming:kidding:

[steg]

Would someone post the address? I'd like to buy some but haven't found where to go, I'd appreciate it...............steg

[wistlepig1]

Steg, here is the address. You can also click on his name here "Bullshop" and PM him and in the vendor section. hope this helps
The Bullshop
HC 62 box 5640
Delta Junction Alaska 99737
Thank you!

[squid1230]

Ok guys, no idea what Bullplate is for, except maybe a mouthwash or foot lotion. Seriously - never tried the stuff - what's it for? Is it a mold release agent, or sprueplate lube? Inquiring ( albeit ignorant) mids want to know.

[DLCTEX]

Use it to lube the sprueplate and alignment pins. Also apply to mould surfaces outside the cavities to prevent lead smears from sticking to the mould. It actually permits cutting the sprue while the alloy is still in an almost liquid state without smearing. There is no carbon buildup as there is with beeswax and many other things used to lube a mould. Mixed with bees wax it makes a boolit lube named Speed Green, an excellent lube. Also a good lube for triggers, bolts, slides, etc,

[waksupi]

Ok guys, no idea what Bullplate is for, except maybe a mouthwash or foot lotion. Seriously - never tried the stuff - what's it for? Is it a mold release agent, or sprueplate lube? Inquiring ( albeit ignorant) mids want to know.

It is for lubing the top surface, and sprue plate of the mold. Also, for alignment pins, and any pivot points.

I am pretty sure that Bullshop, Jr., uses it in lieu of a steady supply of Dapper Dan's Hair Pomade. It really slicks down his hair, and he looks a bit like Alfalfa when using it. It is the only hair dressing he could find, that would let him have that little spike on the top of his head. It absolutely drives the women crazy, and he has to beat them off with a stick.

[AnthonyB]

Eight bottles? Just how long do you expect to live?
Tony

[Edubya]

Eight bottles? Just how long do you expect to live?
Tony

Forever, or I'll die trying to.
EW

[mastercast.com]

Eight bottles? Just how long do you expect to live?
Tony

A few more years I hope!

I am a commercial bullet caster.

I use more than most.....a LOT more.

[Suo Gan]

:p If you use it straight it'll keep stuff from sticking to your dentures!

Gear

Its great for hemorrhoids too! But be prepared from the odd stares from teenagers when you walk by with your droopy pants. They just won't stay up and keep slipping down. Will take the wife awhile to get used to the grass stains too. LOL

[Slow Elk 45/70]

Bull plate is great goodstuff for what I use it for....people cuss it whine about it etc....but for what it is made for it is hard to beat ...IMHO...you know they are like some body parts, we all have one....used properly it is geat stuff in my humble openion....

[fishnbob]

OK, I give up, What does IMHO stand for and that other thing I see once in a while PITA? We need a glossary of definitions for acronyms or whatever they are called.

[chaos]

OK, I give up, What does IMHO stand for and that other thing I see once in a while PITA? We need a glossary of definitions for acronyms or whatever they are called.


IMHO= In my Honest Opinion

PITA= Pain in the %^&

[Bulletlube]

Mastercast does not plan to die. Bull Plate Lube is great stuff. Personally I would not try it as mouth wash no matter how much Vodka was added.

[edsmith]

pansy :))

[Archer]

I ordered some the first part of this month, and it came in just a few days. Pretty darn quick coming from Alaska. It works great, as most of you already know. Don't know how I got along without it before.
Thanks Dan, Good product.

[bkbville]

Hmm... I thought IMHO means "In my Humble Opinion" - at least that's what it meant when Al Gore and I invented the internet.

I'm going to have to try this bullplate stuff afterall...

[Paladin 56]

Dang. I feel like the only lemming left on the cliff.

Guess I'll jump off as well and order this casting elixir known as Bullplate.

[mtgrs737]

Dang. I feel like the only lemming left on the cliff.

Guess I'll jump off as well and order this casting elixir known as Bullplate.


You might as well join the gang! Dan will be happy to sell you a bottle of his magic elixir, but not until he shakes that Monkey's foot over the bottle, after all it is pure blue magic!

[deerslayer]

The "H" means humble if I say it

[Faret]

That stuff works awesome on my shotmaker ramp and drippers.

[Colorado4wheel]

I know people love the stuff, but I have not found it to do anything. Maybe I am doing it wrong. What should I notice?

[Pistol Champ]

Has anyone used 2 cycle oil instead of BP Lube?

[bigboredad]

Pistol Champ
i have used 2 cycle oil in place of bp lube and has worked great. I had just a small amount left in a bottle and was about to throw it out. If bp lube works better than 2 cycle the stuff must be magical. I really need to quit thinking about buying some bp lube and just do it. But until I do the 2 cycle works great you can cut the sprue early and no lead smear and I really like the way it smells

[mdi]

I receiently moved and am still unpacking my tools. I have a good pair of side cutters (Dikes) that had some rust on the pivot (much wetter in Oregon than So. CA). Bullplate was the only lube unpacked so I tried it. Less than a drop of Bullplate freed them up real quick. Works for me...

[alfloyd]

Quote:
We need a glossary of definitions for acronyms or whatever they are called.


If you want to know what some letter combo means go to
http://www.acronymfinder.com/

It has everything there.

[bigboredad]

here you go this site helps mehttp://www.web-friend.com/help/lingo/chatslang.html a lot on the slang

[cajun shooter]

Bullplate is also used for making a darn good lube for smokeless powder if you are bent that way. If not then Dan sells a lube for shooting real powder also.