03-A3 scope ???

[Freightman]

I see B- square has a no gunsmith scope mount for the 03-A3 is it any good???

[Lead Fred]

If you dont mind it moving to and fro.

I bought every mount I could for a Garand, and not one of them worked worth a damn. The B-Square being close to the bottom of the pile

[Freightman]

That's what I ask for. Thanks!

[KCSO]

It B Square for a minute or two?

[Blackknight]

The B Square is a good mount if it is set up right. It has a mixture of steel and aluminum parts, as do most of the no gunsmith mounts. The trick is to determine the zero of the rifle (with cast you need more elevation) and then use blue lock tite on all of the adjustment screws; except the locking screws, I back them all of the way out and then after the blue lock tite is set up I put them back in with small screw lock tite. I use aluminum tape on the pad that has the large screw, to adjust windage. It helps if you have a bore sighter to determine the rifle's zero. I have switched mine between two rifles for years and have shot many hundreds of rounds with no loss of zero with this method.