PDA

View Full Version : 35 rem brass



Deputy Dog
03-21-2010, 07:04 PM
Does any one have a lead on where to buy some 35 rem brass I am stumped trying to load for my new marlin in 35.

405
03-21-2010, 07:30 PM
brass? Usually a google search will show something! Normal suspects are places like Midway, Graf, Cabelas, Midsouth, Huntington, Starline and sites like gunbroker, gunsamerica or auction arms. Currently Graf shows 35 Remington is available.

1hole
03-21-2010, 07:51 PM
I'd buy a box of factory stuff and test it for accuracy, and speed too if I had access to a chronograph. That would give something for a future reference and a box of brass too.
In fact, that's exactly what I did, all those long years ago! :)

Enjoy, the 336/.35 is a great deer and black bear rifle. Try some Rem 200 gr. RNCLs and full charges of IMR 4064. I get 100 yard groupls about a half inch wide by one and a half high at about 2,050 fps. Midway frequently has the bullets in Rem bulk packs, they are MADE for that cartridge but the other brands seem to be made for higher speed catridges and don't expand as well, not for me anyway.

Have fun!

405
03-21-2010, 09:43 PM
I assume you are going to reload cast for the 35 Rem. If so, then buying a box of 20 factory Jbullet cartridges will cost at least $30-35 and yield 20 pieces of brass. It will likely show good accuracy with the Jbullets. If you decide to reload either cast or Jbullets it would seem to make more sense to start with a little more brass. Then you can load either Jbullet or cast loads. Graf price delivered to your door for 50 pieces 35 Rem brass would be $33.50. Or, since they charge a flat shipping rate of 4.50 , it would be 62.50 per 100. (corrected)

Deputy Dog
03-21-2010, 10:03 PM
Thanks 405 Iam going to try and find them on the web and order a hundred.

405
03-22-2010, 09:48 AM
Thanks 405 Iam going to try and find them on the web and order a hundred.

Deputy, sorry that's 33.50 per 50, delivered. Here's the link.
https://www.grafs.com/metallic/817

Deputy Dog
03-22-2010, 07:32 PM
405
brass,mould and gc on there way thanks[smilie=w:

405
03-22-2010, 07:52 PM
Deputy,
Good deal! Sorry about the wrong $. Last night I was keeping one eye on Pelosi and one eye on the confuser screen and just wasn't paying enough attention. Good luck with the 35 Rem.- they tend to be cast bullet friendly :)

izzyjoe
03-22-2010, 08:14 PM
might check on gunbroker,you can new brass for about 26$ for 50 plus shipp'n. i was buying alot of 1 fired on gunbrker, but that stuff has gone though the dern roof. people act like they aint gonna' make anymore. i've seen 1fired go for 10% less than new brass. i was at a gun show back in jan. a guy at a table had new .35 brass for $15 for 50 in plastic boxes, he had 3 boxes of them. i ripped my jeans try'n to get my wallet. (score):drinks: i asked if he had more, he said no. he knew what had just happen, i walked away( heck i ran like i stold'em) yahhooo.