Scrapper
03-12-2010, 04:01 PM
Hello everyone this is my first post here and I'm glad to have found this place as I'm getting into some loads with lead bullets.
I have a box of each of these bullets and was wondering if I need to size the bullets down to run them through my 460 XVR 8 3/8". These bullets measured .453" in Dia. but the box says .452". These bullets will push through the cylinder chambers with some force by hand is this sufficient for accuracy?
So I have been told that they are ready to shoot out this gun, as per the manufacturer.
As per the Lee Die Kit instructions.
These are starting loads>>
360gr with 35gr of H110
395gr with 30gr of H110
If anyone has any experience with these please chime in let me know how you made out. When I get to finally shoot these I'll post more.
I have a box of each of these bullets and was wondering if I need to size the bullets down to run them through my 460 XVR 8 3/8". These bullets measured .453" in Dia. but the box says .452". These bullets will push through the cylinder chambers with some force by hand is this sufficient for accuracy?
So I have been told that they are ready to shoot out this gun, as per the manufacturer.
As per the Lee Die Kit instructions.
These are starting loads>>
360gr with 35gr of H110
395gr with 30gr of H110
If anyone has any experience with these please chime in let me know how you made out. When I get to finally shoot these I'll post more.