7.62/54r bullet mould

[Robyn]

[smilie=s: Hi all
I need a little advice from those experienced the the 7.62/54r nagant 91/30
I have been using the lee 185312 mould with trail boss powder with fairly good results. My bore slugs at 311... the question is will a lee 160 grain work or has someone got a better idea of what will work ...
I want to keep using trail boss powder as I have heaps of it.
regards Robyn

[JIMinPHX]

That boolit works fine in a Nagant with a little Unique under it.

[Frank46]

Robyn, the lyman #314299 is the bullet for the 7.62x54r. Slug your bbl and size to .002 over the bore diameter. I use 4759 in mine. Weighs about 210 grains and is an excellent bullet in that caliber. Frank

[Calamity Jake]

+ one on 314299