Need Barrel For Remington Rolling Block

[cumminsnut76]

Looking for a barrel for a Remington Rolling Block 1.5 sporting model. I prefer a 45-70 but will consider most any other caliber. PM me if you have one for sale or any information.
Thanks

[Freightman]

Check with Numrich gun parts they use to have some 45/70's for the RB.

[4060MAY]

FYI
A No.1 1/2 Sporting RB has a barrel shank of .850 thread OD
normally chambered for pistol cartridges

A No. 1 has has a barrel shank of .975 thread OD

A No.5 has a barrel shank of 1.055 with sliding extractor and .975 Thread ODwith Rotary extractor.

The Navy Cadet is .836 thread OD
Dimensions according to DeHaas

All appear to be 12 Square T.P.I.
Chambering data for the 1 1/2 is from Konrad Schrieder's book Remington Rolling Block

HTH

[Freightman]

FYI
A No.1 1/2 Sporting RB has a barrel shank of .850 thread OD
normally chambered for pistol cartridges

A No. 1 has has a barrel shank of .975 thread OD

A No.5 has a barrel shank of 1.055 with sliding extractor and .975 Thread ODwith Rotary extractor.

The Navy Cadet is .836 thread OD
Dimensions according to DeHaas

All appear to be 12 Square T.P.I.
Chambering data for the 1 1/2 is from Konrad Schrieder's book Remington Rolling Block

HTH
Excellent information thanks.

[pietro]

FWIW, This forum has a "Want To Buy" section in the "Swappin' & Selling" section, which is a more appropriate location for threads like this:

http://www.castboolits.gunloads.com/forumdisplay.php?f=47

.