Adjustable cylindrical bullet molds?

[Naphtali]

Please identify makers of [custom??] adjustable cylindrical cast bullet molds?

[Baron von Trollwhack]

I think our Canadian Cast BOOLITEER Rick does that, and very nice too, BvT

[Don McDowell]

Old West Bullet Molds

[waksupi]

Tom Ballard, over by Helena used to make them. Don't remember which town now, for sure. Jefferson City?
I haven't seen Tom in years, and don't even know if he is still alive. However, if you find one of his, you will have a VERY good mold.

[Southern Son]

I think that Steve Brooks makes an adjustable PP mold, and another is KAL Tool and Die.

[wonderwolf]

Please identify makers of [custom??] adjustable cylindrical cast bullet molds?

Are you talking about like the old ideal molds that had the ejection pins? one round mold block? not two?

[Naphtali]

Are you talking about like the old ideal molds that had the ejection pins? one round mold block? not two?Yes, sir, I am.

[longbow]

I make my own and they work quite well.

I suspect that a machinist wouldn't charge much to make one for you if you don't have a lathe.

I bore my cavities in 1 1/2" diameter round bar using a small lathe. The rest can be done with hand tools and a drill press if you have one ~ not necessary but nice.

A picture of the Ideal Cylindrical mould is shown in post #6 here:

http://castboolits.gunloads.com/showthread.php?t=60456

Mine are much beefier but same principle.

Heathydee is also making pushout moulds but using square bar.

Longbow