PDA

View Full Version : load data for wst



fixit
02-17-2010, 10:04 AM
sometime ago a friend gave my son about 14 lbs of powder, about equal amounts of w540 and w super target. my son and his friends had a heyday doing pyrotechnics with it (no bombs, and he is/was of sufficient age to do so safely!) with the understanding that they were to leave me abt 2 lbs of each. couldn't find much on ether one untill recently when i found that 540 and hs6 were the same. works nicely with my 41 and 44s. so now i'm interest in data on wst. besides smaller capacity cases, is there any data available for this stuff?

wiljen
02-17-2010, 05:01 PM
If memory serves (and double check me) WST is slightly slower than clays so you should be able to use clays starting data as a starting point for WST loads.

Bullshop Junior
02-17-2010, 05:34 PM
The newer WST is the same as Bullseye I think.

imashooter2
02-17-2010, 06:23 PM
Email me and I'll send you a PDF of some older Winchester pistol data. WST doesn't have nearly as wide an application as Bullseye...

hcpookie
03-23-2010, 05:20 PM
I scanned a copy of the Winchester 15th edition reloading manual (1997) - lots of WST loads in there:

http://cid-5b54fc51a7917265.skydrive.live.com/self.aspx/Reloading/winchesterreloadmnl15th.xps

If you can't view the XPS file you can download the viewer here:

http://www.microsoft.com/whdc/xps/viewxps.mspx