Mold 7.62mm-130-SPL 312 dia

[indymadcaster]

i got some of these gas checks on with rooster lube weight is 125 grains and sized @ 312 i want to use in 762x39 and 308win anyone have load ideas???

thanks

[Gar]

I'm using 22 grs of H335, bullet sized to .310 for my SKS. It's fairly accurate (3" group) out to 150 yards. I can't get a decent grouping out of my AK with it though.

In the 308 Win, I would slug the bore and resize the bullet accordantly. I do not use this bullet in my 308 so I don’t have any load suggestions for it.

[indymadcaster]

wow

sooo what OAL did you use?????????

[Herb in Pa]

http://castboolits.gunloads.com/showthread.php?t=66650

[1mauser]

Used Alliant 2400 in my Miny thirty from 14,0 to 16.0 with the RCBS mold with very good results. At 14.0 the action cycles at its minimun, throwing the emty cases at your feet, bullet speed is at 1845 fps. bullet drops 6" at 50 yds. At 16.0 speeds up to 2089 fps hitting metal silhouettes at 100 yds, every time I pulled the trigger.