Russ68
02-06-2010, 04:08 PM
with my newly constructed PID temp controller 8-)
I made it so I can swap the probe between all my pots. I also "recycled" a blown up UPS for the housing. I was ladle pouring some Lyman 457193 's and with the temp controlled nicely, they were dropping at right at 411 +/- .3 grains or so :mrgreen:
This was probably the best addition to my casting equipment - hotplate would be a close second.
I made it so I can swap the probe between all my pots. I also "recycled" a blown up UPS for the housing. I was ladle pouring some Lyman 457193 's and with the temp controlled nicely, they were dropping at right at 411 +/- .3 grains or so :mrgreen:
This was probably the best addition to my casting equipment - hotplate would be a close second.