View Full Version : .30-40 AI Part 2
AviatorTroy
02-02-2010, 08:50 PM
Well finally had a chance to get out and shoot some this afternoon, so I have a picture of what the cases are coming out like. Looks like the body of the case is two distinct diameters, which leads me to believe that when someone rechambered the 2 groove barrel from .30-06, it didn't get set back enough and the back half of the body of the chamber is probably the diameter of the '06 case.
So it looks like when I get a chance I will go ahead and rechamber with the A.I. reamer. Thanks to everyone who contributed to the troubleshooting...
http://i254.photobucket.com/albums/hh100/aviatortroy/-2.jpg
AviatorTroy
02-02-2010, 08:50 PM
I wish I could figure out how to increase the size of the picture I post here....
skullmount
02-02-2010, 10:36 PM
I wish I could figure out how to increase the size of the picture I post here....
Troy,
There should be a few choices of links to get your picture over here from photobucket, ya just need to figure which 1 it is.
AviatorTroy
02-02-2010, 11:14 PM
<a href="http://s254.photobucket.com/albums/hh100/aviatortroy/?action=view¤t=-2.jpg" target="_blank"><img src="http://i254.photobucket.com/albums/hh100/aviatortroy/-2.jpg" border="0" alt="Photobucket"></a>
AviatorTroy
02-02-2010, 11:14 PM
http://i254.photobucket.com/albums/hh100/aviatortroy/-2.jpg
AviatorTroy
02-02-2010, 11:15 PM
<a href="http://s254.photobucket.com/albums/hh100/aviatortroy/?action=view¤t=-2.jpg" target="_blank"><img src="http://i254.photobucket.com/albums/hh100/aviatortroy/-2.jpg" border="0" alt="Photobucket"></a>
AviatorTroy
02-02-2010, 11:16 PM
Argh! I give up! [smilie=b:
Multigunner
02-03-2010, 04:57 AM
Well finally had a chance to get out and shoot some this afternoon, so I have a picture of what the cases are coming out like. Looks like the body of the case is two distinct diameters, which leads me to believe that when someone rechambered the 2 groove barrel from .30-06, it didn't get set back enough and the back half of the body of the chamber is probably the diameter of the '06 case.
So it looks like when I get a chance I will go ahead and rechamber with the A.I. reamer. Thanks to everyone who contributed to the troubleshooting...
http://i254.photobucket.com/albums/hh100/aviatortroy/-2.jpg
Looks like you are correct.
I used the magnification function of my browser to increase the size of the image. resolution was still good.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.