PDA

View Full Version : Loads for 358429 in a 38 Spl.



Wayne S
01-26-2010, 08:06 PM
A friend wants some practice/plinking loads for his wife, she has a Ruger and he brought me a 358429 mold.
Looking for some light load data.

Ben
01-26-2010, 08:15 PM
3.2 grs. Bullseye or 4.5 grs. Unique

bob208
01-26-2010, 08:54 PM
3.5 gr red dot used it for many years still do.

vanilla_gorilla
01-27-2010, 05:54 AM
I've been loading 3.5 grains of 231 with that boolit. Gives me 805 fps from my 5 inch S&W M27.

2shot
01-27-2010, 01:31 PM
I have loaded as light as 2.7 grains of Bullseye with the 358429 and had great accuracy at 50 and 75 feet.

2shot

9.3X62AL
01-27-2010, 03:00 PM
All the above loads are good ones. It is hard to find a "bad" load with this boolit in 38 Special. I didn't get one of these designs until fairly recently, and regret not having done so sooner. It is a GREAT boolit.

scrapcan
01-27-2010, 03:18 PM
I use 2.7 to 3.3 gr Bullseye or 4.3 to 4.5 gr unique. It is very nice to shoot and easy to cast. I load it similar to what I load 358495 WC so I don't have to change charge bar/bushing.