Suggestions........

[6pt-sika]

I may have a 50-110 on the way , not quite sure yet [smilie=1:

However I want to get a close copy of the original Winchester 293 grain HP mold . I called NEI and they will not make HP molds . Mountain Mold will not . Any other sources that would be likely to do this type of thing ?

An original mold would be fine with me also if it's in decent shape. :drinks:

[Dale53]

6pt;
You might want to check with Buckshot. There may be a mould for a solid bullet that Buckshot can convert to hollow point. I have a newly acquired .45 bullet mould that I will send on to Buckshot if it works well in my revolver.

For instance, Lyman offers a fifty caliber 340 gr bullet (515139) that can be hollow pointed by Buckshot (I would think). It looks like it would work well for your purpose.

FWIW

Dale53

[Bullshop]

Sounds like your talking about the 50/110 express. There were two 50/110 rifles with the same chamber but different twist. The express was the slow twist that shot the light bullet. I do have an origonal mold for the light boolit. I wont sell the mold but will sell boolits, sorry not HP.
BIC/BS