PDA

View Full Version : Tubular 2000



kywoodwrkr
01-18-2010, 06:46 PM
What was the T2000 similar to?
All old notes gone.
Thanks.

beagle
01-18-2010, 07:02 PM
Dave.....Naw...you didn't lose that data? I'll see if i can find the sheets you gave me but it may take a couple of days in that mess in the shop.

I'm using in the .30/06

311466 166.6 grains Tu2000 23.0gr 1859 FPS

That load is not even sweatin' so take it from there. Think you and I are the only ones that got any of that./beagle

NuJudge
01-18-2010, 08:23 PM
The comments I've seen compare it to 4198. The burn rate charts say that, but perhaps closer to 5744at least according to this burning rate chart (see (122 & 123):
http://home.hiwaay.net/~stargate/powder/powder.htm

Vectan apparently classes Tu2000 as being next to H4198 and IMR4198:
http://www.nobelsport.fr/nobelsport/fr/ ... e_2006.pdf

Friends of ours class it as very close to H4198 and good with cast bullets:
http://castboolits.gunloads.com/showthr ... Tubal+2000

primersp
01-19-2010, 04:47 AM
tell me in what caliber and bullet you want reload it ,and i try to find data here

kywoodwrkr
01-19-2010, 10:33 AM
Dave.....Naw...you didn't lose that data?
JOhn,
Oh yeah I did. My copy anyway! :groner:
Found the second case of it yesterday along with a case of Norma 204 I had gotten from Grafs. Christmas just continues!
Thanks to everyone on the responses.
I thought it was equivalent to 4198 but just wanted to check.
Thanks again.