motorcycle_dan
05-31-2006, 09:25 PM
Someone help here. I'm lub/sizing my .45 RN bullets and then drop'n them into a coffee can. From there they are poured into my Dillon bullet tray. Some lube from other bullets gets pretty much everywhere on the projectile. When loading there is almost always wax up near the case mouth. So I painstakenly wipe each cartridge before case gaging it. Very time consuming and hard on my poor fingers.
Look'n for an easier way.
Suggestions? Plunk the loaded ammo into a bucket of soapy water? solvent?
Run them through the dishwasher when the spousal unit is out shopping?
What about another trip through the polisher?
There's gotta be an easier way. Mebby another type of bullet will spread the lube less? I have an H&G #34 with a larger single lube groove. Will that spread lube more or less?
Look'n for an easier way.
Suggestions? Plunk the loaded ammo into a bucket of soapy water? solvent?
Run them through the dishwasher when the spousal unit is out shopping?
What about another trip through the polisher?
There's gotta be an easier way. Mebby another type of bullet will spread the lube less? I have an H&G #34 with a larger single lube groove. Will that spread lube more or less?