acoilfld
01-11-2010, 07:08 PM
Just finished forming some .308 brass from 30-06 brass. I have trimmed to length and neck turned them. I want to fire form then with a light charge to sharpen up the shoulders. Might as well have some fun firing these rounds at the same time (104 in total).
I have 115 grain cast bullets, sized to .310 as well as 173 grain also sized to .310, both are gas checked.
I do not want to buy powder for these if I can avoid it. I have quite a bit of RL 15, Bullseye, H110, & Longshot on hand, as well as a small quanity of W571 and Reddot.
Anyone have any advise/experience with these bullets/powders in this cartridge?
Thank you in advance for any assistance.
AC
I have 115 grain cast bullets, sized to .310 as well as 173 grain also sized to .310, both are gas checked.
I do not want to buy powder for these if I can avoid it. I have quite a bit of RL 15, Bullseye, H110, & Longshot on hand, as well as a small quanity of W571 and Reddot.
Anyone have any advise/experience with these bullets/powders in this cartridge?
Thank you in advance for any assistance.
AC