Anyone make a #3 buckshot mold?

[buckshot&brass]

That would be a .250 round ball mold.
I'd like to find one.

[SuperBlazingSabots]

Hello Buckshot&Brass Sharp Shooter USA makes the buckshot mould for around $35 and the mould will cast about 20 shots at a time you can get them on E-Bay.
Happy Holidays
Ajay Madan
www.PreciousVideoMemories.Com

[skeettx]

Hello

Look here

http://cgi.ebay.com/000-Buckshot-Lead-Mold-for-Shotgun-Reloading-Buck-Shot_W0QQitemZ320466058707QQcmdZViewItemQQptZLH_De faultDomain_0?hash=item4a9d43fdd3

Yes, I know it says 000 and not #3 but read the full auction :>)

Thanks
Mike

[buckshot&brass]

I have seen those.
#3 buck is one of the few not listed.
I Emailed them.....so we'll see.

I know there are a few others interested in a #3 buck shot mold.

[shotman]

He makes them but its a wait list . No 3 is a rare one its 25 cal works good for a round ball load in the 25stevens Tell him you want one and he will put you on list .
he is member here also look up --skysunlimited--

[skiesunlimited]

The #3 molds will be done in the next few days. Are there any other sizes you guys would like to see up to .800?
Thanks
Rick

[buckshot&brass]

Thats great news.
Thanks.
Thats a heck of a selection.

[diehard]

I own a '00' mold from Skiesunlimited and have cast more buckshot with it than I can shoot next year. You won't be disappointed with the quality of that mold.

[ihunts2much]

The #3 molds will be done in the next few days. Are there any other sizes you guys would like to see up to .800?
Thanks
Rick

Up to .800? that opens up a lot of possibilities!

[220swiftfn]

Yeppers, still keeping an eye out for #2 buck...

Dan

[220swiftfn]

Wow, hows THAT for service? Just got the #2 on the 'bay. Thanks Skies, I know you made that one for me!!! :)

Dan

[peter nap]

The #3 molds will be done in the next few days. Are there any other sizes you guys would like to see up to .800?
Thanks
Rick


How about .600 ??????

[skeettx]

Hello Peter Nap
Will you be using a .600 in your 577 Snider?
Mike

[peter nap]

Hello Peter Nap
Will you be using a .600 in your 577 Snider?
Mike

Nope...Tri ball loads in the Blammy Shells.

http://i198.photobucket.com/albums/aa57/peternap/b1-3.jpg
http://i198.photobucket.com/albums/aa57/peternap/blammy-shells3.jpg

[Spudgunr]

I think large roundballs in useful sizes for the common gauges to use as slugs would be nice. .56" (20 gauge roundball for use in a wad) and .60 or .61 (20 gauge without a wad), .66 (12 gauge with a wad), .69 (12 gauge with a patch), and .720 (12 gauge no patch/wad) could all be useful. I saw your ebay ad for custom sizes and came here to see what requests were out there.

I picked up a .310 mold, I plan on a 00 mold (probably a blemished if I see one pop up, I'm in no huge hurry), and if you made round balls I could use in my 20 gauge I would buy one of those (prefer the .56" for use in a wad, I wasn't bright enough and got a .575 which is too big for my 20 ga).

[shotman]

you guys check at big lots they have [or did] pet toe nail clippers for $1 they are small and work great to cut the balls off [och] rick

[skiesunlimited]

Most of the sizes Spudgunr brought up are on the drawing board. Next size will be .690 It will be a five cavity, you can expect it in a week or so. What should be next?
Thanks
Rick

[Spudgunr]

Another idea: Put two types of buckshot in one mold (say 000 on one side, and 00 on the other). What you may want to do though is see how many repeat customers you have. If a large percentage of your sales is repeats, you may not want to do it (since it may cut in to repeat sales). Maybe do it for the odd sizes? I'm not going to buy a #4 buck mold, but, I probably would buy one that had #4 AND something else (4 and 2, 4 and 1). Otherwise, I'll buy 5 pounds of #4 buck and it'll last me forever since I only want it for specialty stuff.

Also, put some up on the swappin and sellin board here, you can avoid some ebay fees.

[Rusty Shackleford]

I bought a OO version from skiesunlimited.

Great product!!!

Great service!!!!!!!