A hollow pointed ,mould with captive corepin

[Buckshot]

http://www.fototime.com/AD6CEF56C8FE717/standard.jpghttp://www.fototime.com/26496D670796088/standard.jpg

Beagle, as I look at the HP pin now, it definately doesn't seem to have enough draught. Urny said it was a rat b*stard to let go of the boolit. He was supposed to get me the measurements off it so I could make another, "New and Improved" one. I have since begun keeping a drawing with dimensions on it for each thing that I do.

Urny said it worked great otherwise.

..............Buckshot

[Willbird]

You stole parts of that from a Penn levelwind reel didnt you ?? bwaa haa haa

Bill

[beagle]

Rick...Looks like good work.

You can save the work of that cam by drilling a hole in the side of the mould and using a shanked 4-40 or 6-32 screw to hold the HP pin captive and it will align and index just fine. One tap and it releases the bullet and then when inverted, it falls off if the taper is right.

That was the Cramer and early Ideal method like they used on their HB design moulds.

But that will work good....just extra work./beagle

[buck1]

NICE WORK buckshot!!!

[Buckshot]

...............Thanks guys!

.............Buckshot