View Full Version : Lee 311-100-2R for 30 Carbine?
smithgar3840
12-17-2009, 12:08 AM
Just wondering if anyone has tried this mold with a 30 carbine. The 113gr. flatnose won't feed in my rifle.
thebigmac
12-17-2009, 12:13 AM
TRY LYMAN 311359, WORKS GREAT WITH 2400..... Mac
smithgar3840
12-17-2009, 11:12 PM
I was trying to stay away from a cast iron mold if possible
smithgar3840
12-17-2009, 11:14 PM
I like aluminum molds. I was trying to stay away from cast iron if possible.
yodar
12-17-2009, 11:50 PM
TRY LYMAN 311359, WORKS GREAT WITH 2400..... Mac
what was your load ?
I cast that bullet
I am trying out 311410
yodar
The Lee 120 gr GCRN boolit has always worked well in my carbine...
Try polishing the nose of the 113fn with fine steel wool and give the cases a taper crimp. This worked for me.
smithgar3840
12-19-2009, 01:56 AM
You may have a point on the polishing. I've been using LLA and it does make them sticky. I have some spray moly. Would that be worth a try?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.