762x25, what mold ?

[yancey]

I have a tokarev pistol in 762x25 that im wanting to get a mould for.
Can anyone tell me what mould will work good for this round.
thanks , yancey

[Ricochet]

I can tell you it's not the TL314-90-SWC. I'd like to try the 311-093-1R and the 311-100-2R.

[montana_charlie]

That 2R nose physically resembles the jacketed factory ammo I have on hand.

Perhaps the Lyman 313249 (85 grains)...?
CM

[autofix4u]

I can tell you the Lee 311-100-2r runs through all my toks like butter. I have other moulds that some of the pistols like better, but the 100grn Lee has never failed run to run flawless. Most tok pistols run large on the bore size, but I have acouple that the neck area of the chamber is too tight to run 312 & up boolits. I turn the necks on the brass for these two a couple thousanths. For the $$$ the 100grn lee is the way to go.

[yancey]

I think i will try the 311-100-2r. Thanks for the help guys

[leadeye]

I don't have a Tok but the Lee 311-100-2R is my go to bullet for all my 30 Broomhandles.