PDA

View Full Version : Cast Boolits keychain Benefit Sale



Springfield
12-01-2009, 03:11 PM
63902


I am selling some custom made Cast Boolits leather key holders. The price is 5.00 for the flat ones, 6.00 for the loop type and 7.00 for the loop with a snap, shipped. For every one I sell I will send 1.00 to 45Nut/Ken. I would send it all but to tell the truth, I gotta recoup the 165.00 cost of the stamp. I know, I shoulda read the fine print about the custom set-up charges, but what's done is done. And it really is a cool stamp. So, you have your choice of brown or black, and either brass or nickle rivet. For size, the logo itself is 2.5" long, with an 1.25" split ring. Show your support for this site, WITHOUT getting a tattoo!

45nut
12-01-2009, 04:19 PM
That is VERY COOL!

Bob Krack
12-01-2009, 06:17 PM
Put me down for two of them - any color, any hardware, at your convenience.

$10.00 to your PM'd address on 12/04/09. (make the strap a loop and I will go $7.50 each)

Bob

Bob Krack
12-01-2009, 11:26 PM
Per your E-Mail:


I'm sorry, but what do you mean by make the strap a loop? And how big a loop?

If the strap were approximately twice as long and folded back over itself to the rivet.

Bob

Springfield
12-02-2009, 01:20 PM
So do you want it to be like it is now but larger, looking kinda like a heart, or do I run it all the way 'round so it looks like a circle?

Muddy Creek Sam
12-02-2009, 01:25 PM
Would make a pretty cool Snap on wristband.

Sam :D

Bob Krack
12-02-2009, 01:59 PM
So do you want it to be like it is now but larger, looking kinda like a heart, or do I run it all the way 'round so it looks like a circle?
What I was hoping is that it could be the same size as you made it except:

2 or three inches long from the rivet and then folded back under and maybe even ended under the rivet.


\-----------------------
/----------------------- is my best pic of what you show



\----------------------- ------------------------/ here is my best pic of what I would like.
..CAST BOOLITS
/----------------------- ------------------------\
...........................^ fold here.................

So that I could hang it from my belt.

If that don't work or its more costly that way I will make another offer or just take two of the originals. Belt loop would much handier for me though.

Bob

Springfield
12-02-2009, 08:01 PM
OK, I was thinking you wanted the skinny part longer, but it looks like you want the fat part longer so that it forms a loop that you can put your 1 1/2" ? belt through, kinda like a leatherman pouch except it is a keyholder. I can do that.

Springfield
12-02-2009, 11:41 PM
Hopefully this is what you were talking about. This is the light brown color, made for a belt. If so, then 7.50 each and Ken now gets 3 buck a pop.

Bob Krack
12-03-2009, 11:30 AM
Hopefully this is what you were talking about. This is the light brown color, made for a belt. If so, then 7.50 each and Ken now gets 3 buck a pop.Bingo!

Exactly what I was trying to say.

PM your address and $15.00 coming at ya!

Thanks,

Bob

Springfield
12-03-2009, 12:14 PM
PM sent. OK guys, lets help support the site and get something useful at the same time. Give them away as stocking stuffers. Or come up with more ideas for things I can make with the logo you might want, I'm easy. Anybody need a new belt with this logo on the back?

Stick_man
12-03-2009, 02:37 PM
I'd be interested in seeing a couple belts. Possibly one in black and one in brown. Something with a snap for attaching custom belt buckles? It seems like I saw a Cast Boolits belt buckle not too long ago. (maybe I was just dreaming though). Any idea on costs?

Springfield
12-03-2009, 03:49 PM
20.00 a belt,shipped, with a brass or chrome buckle, like the one shown. That is my belt, I took it off for the pic. Just a regular solid leather belt with a little border line. I don't use snaps, not secure enough, I use threaded screw posts. 5.00/belt to Ken for Christmas . Generally 2" over pants waist size works well when ordering. And I can put the Cast Boolits stamp anywhere you want on the belt. Can also make it any width from 1" to 1.5".

www.ohioccw4u.com
02-15-2010, 03:59 PM
Im a BIG guy, I wear a 48-50 Inch Pants and want a 1.5 Inch belt. Whats the Price for my belt ? Can you do a Logo every 6 Inches all the way around ? eMail me a Price at
ohioccw4u@yahoo.com. Thanks :-)

Springfield
03-11-2010, 06:18 PM
Ohioccw: 30.00 shipped

wellfedirishman
03-20-2010, 09:50 PM
Mark, I will take one please, black with chrome rivet. PM me your address for payment.

BTW, that Dillon SQD I got from you a few years back is still running strong.

Springfield
03-21-2010, 12:31 AM
I will PM you with the info. Are you the one I bought the sporterized swedish mauser from? If so, we shot it the other day, finally, works well. Still need to polish the bore some more, though. Fits the wife well, too small for me.

wellfedirishman
03-25-2010, 11:00 AM
Springfield, yes, that's me. I am glad it worked well.

Guys, these keychains are great, I just got mine and was very happy with it. Buy some :-)

Springfield, can you punch or mark a name and phone number on the back (e.g., as a property or luggage tag?)

Springfield
03-25-2010, 11:21 AM
Sure, bring it by sometime and I will do that.

Greg in Malad
03-28-2010, 10:58 PM
I need two keychains, One brown with a brass rivet and one black with a chrome rivet. These are much better than the red plastic one that came with the truck.

Clinebo
09-11-2011, 11:08 PM
Are you still doing these?

Springfield
09-14-2011, 02:44 PM
Yes I am. You can contact me at whytelw@comcast.net

plmitch
02-07-2012, 12:38 AM
Are you still making these?

Springfield
02-12-2012, 09:05 PM
I am, still at www.whytelw@comcast.net

tinyejp
02-12-2012, 09:12 PM
Ohioccw:

Did you get your belt oh so long ago? I'd be interested in something like that and would love to see a pic!

Springfield
02-14-2012, 04:39 PM
tinyejp: Ohioccw never did buy a belt, so we have no pic to show you, sorry.

tinyejp
02-14-2012, 07:48 PM
Ah, bummer. Well, I'll be thinking of you on payday... Keep an eye on your inbox!

mktacop
02-15-2012, 03:24 PM
I'd like a keychain. Do you take paypal?

Longwood
02-15-2012, 04:01 PM
Could you make me a couple of small oval badges/patches for my shooting box?

Springfield
02-15-2012, 04:52 PM
mktacop: I do accept Paypal. Longwood, sure, I could do some ovals. I assume you want the castboolits logo on them.

Longwood
02-15-2012, 10:16 PM
mktacop: I do accept Paypal. Longwood, sure, I could do some ovals. I assume you want the castboolits logo on them.

Yes sir, I think a nice leather oval with the logo would look pretty nice on each side or end my shooting box, don'tcha think?
I have some tooling tools so I can tool the border to save you a little work.

Springfield
02-15-2012, 10:43 PM
The logo is 2 1/2 " by 7/8th". How about you do me up a blank of the size you want on a piece of paper and mail it to me. That way we know you will have enough room to do a border of your choosing, and the shape you want. Thanks.

mktacop
02-15-2012, 10:49 PM
mktacop: I do accept Paypal. Longwood, sure, I could do some ovals. I assume you want the castboolits logo on them.

What Paypal username do I send the payment to? Send as a Gift?

Longwood
02-15-2012, 11:01 PM
The logo is 2 1/2 " by 7/8th". How about you do me up a blank of the size you want on a piece of paper and mail it to me. That way we know you will have enough room to do a border of your choosing, and the shape you want. Thanks.

How about 3" X 5" that is very similar in shape to your logo with the Longhorn steer. The border will be something simple, probably less than 1/4" so if you think smaller or larger would look better then I trust your artistic expertize.
I have Paypal and can pay you tonight but I need a senior memory jog, you need to brief me on how to do Paypal.
I have done it before but I am not exactly sure how.

Springfield
02-17-2012, 04:20 PM
Please Paypal to whytelw AT comcast.net. Please don't send as a gift, I'll eat the extra, only proper, IMHO.

skimmerhead
03-14-2012, 01:18 AM
are you still making these keychains? if so i'd like 2 one dark and one lite

skimmerhead :cbpour:

Springfield
03-15-2012, 10:48 AM
To order keychain please e-mail me at whytelw AT comcast.net Please say whether you want the luggage tag type or the belt type. 5.00 for the former and 7.50 each for the latter, plus shipping.

hunter2
03-16-2012, 03:43 AM
How about instead of a belt you make a couple of slings 1.5", black,2 screw rivets on each end with the ends folded over 3", for a total length of 37" ( 31" with ends folded ) and logo punched on both ends. Have them to me by my birthday on the 23rd.:razz:[smilie=l:

Springfield
03-16-2012, 01:30 PM
hunter: e-mail me at whytelw AT comcast.net and we can work out the details. Sounds perfecty do-able to me.

Lefthandshooter
03-16-2012, 04:42 PM
A sling sounds interesting.

Sounds like a good reason to buy a new rifle!

gbrown
03-20-2012, 10:39 PM
I would like a belt--36 inch, and a key chain--one like Bob Krack ask for. I would like the same logo as the key chain on the belt, dead center of the belt. I've been drooling for this. Thanks, Glenn

Springfield
03-20-2012, 10:51 PM
Sounds good, please e-mail me at whytelw@comcast.net or pm me and we can work out the details. Thanks, Springfield

gbrown
03-20-2012, 11:26 PM
Email sent. Thanks.

gbrown
03-21-2012, 02:24 PM
PayPal sent. Thanks!

ilcop22
03-21-2012, 05:47 PM
I'd be interested in a sling, too, if you start making them.

Springfield
03-21-2012, 08:34 PM
I already make slings, but I need to know what style and what it goes on. e-mail me at whytelw@comcast.net. Everything I make is custom made, so nothing in stock but I will make it to fit what you are doing.

gbrown
03-26-2012, 01:07 PM
Mine arrived in the mail today--that ain't a belt--it's a work of art. Whooee. The key chain/loop/fob is A++++, too. Thank you Springfield!!

Lefthandshooter
03-26-2012, 01:27 PM
May we ask for photos?

gbrown
03-26-2012, 02:51 PM
Not sure who you were speaking to Lefthandshooter, but I'm proud as a peacock with these--glad to share.
P.S. The belt and fob are darker, like the top pic. I used flash on the full belt pic and it showed up lighter.
http://castboolits.gunloads.com/imagehosting/thum_195844f70ba4465285.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=4595)

http://castboolits.gunloads.com/imagehosting/thum_195844f70ba65b5303.jpg (http://castboolits.gunloads.com/vbimghost.php?do=displayimg&imgid=4596)

Lefthandshooter
03-26-2012, 03:05 PM
Was ealking to anybody!

We all love pic's and it helps things sell and thus helps the site.

JonB_in_Glencoe
08-12-2012, 12:22 PM
email sent,
regarding a belt or two and 2 key chains.
and a bump for this thread !
Jon

Longwood
08-12-2012, 02:05 PM
The logo is 2 1/2 " by 7/8th". How about you do me up a blank of the size you want on a piece of paper and mail it to me. That way we know you will have enough room to do a border of your choosing, and the shape you want. Thanks.

Hey,,,
I figured out Paypal.[smilie=w:

I would like the patches we talked about.
I am thinking a couple of rectangles that are about 3 1/2" X 1 1/2" would probably be plenty big enough. I need another belt and maybe a carrying sling for the shooting box also.
P.M. me, and I will send my email address. etc etc.

Lizard333
03-12-2013, 08:14 PM
No pics of the key chains? I'm interested.

Copper75
04-28-2013, 10:16 PM
Are still doing the key chains!
If so I'd like one.

mold maker
04-30-2013, 05:00 PM
I'd like one with the snap to go with my CC pouch.