How I make my ballistic tip bullets

[algunjunkie]

Here is how I place a plastic tip on my bullets
A short video of how I swage a plastic tip.

http://www.youtube.com/watch?v=40keW-W373w

Using this method doesn't really lend itself well to expansion. You are putting alot of plastic on the top of the bullet filling any void that is there. I get little expansion unless I strike a hard object.

[303Guy]

Thanks, algunjunkie. That makes it look easy!

[algunjunkie]

It took me a little while to figure it out. Trying to figure out how to draw the air soft pellet down to fit. Finally out of frustration i threw into the sizing and wham-o. I got lucky.

[Ammosmith]

As soon as I get the dies for my Mega Mite...I am going to try the glow in the dark air soft BB's. They are supposed to be a bit softer.

[plumber]

What weight core are you using?

[algunjunkie]

42 grain, the tip was an after thought. I think that if I drop the core to 40 or 41 I can get it to point a bit better

[algunjunkie]

Well here is my latest attempt.

http://algunjunkie.webs.com/photos/DSC03937.JPG

They came out great but I broke the punch that I needed to make the rebate so they came up a little under sized.

[Caveape]

Hey Ammosmith!

When you make some tips from glow in the dark airsoft pellets, charge them with a flashlight before you let them fly. You'll have homemade tracers the cheap way! LOL

Let us know how that one works out.

[Ammosmith]

Caveape..I LOVE YOU AVITAR! Awesome! I thought the glow tips would make a good marketing gimmik